12
1-800-732-0144
Test Light Instructions
Important: Remove Test Light before placing Receiver Collar on your pet.
1. Set Receiver Collar to Static Correction Level 5.
2. Remove the battery.
3. Loosen the Contact Points with pliers.
4. Bend the leads around the base of each Contact Point.
5. Hand tighten the Contact Points, making sure that the leads
stay in contact with the bases of the Contact Points.
6. Replace the battery.
7. The Test Light will flash in the Boundary Zone if the Receiver
Collar is working properly.
A-67
8. Remove the Test Light and tighten the Contact Points with pliers one-half turn
beyond finger tight.
Save the Test Light for future testing.
Note: If the Test Light does not flash, install a new battery and re-test. If Test Light still does not
flash, contact the Customer Care Center at 1-800-732-2677.