8
2. Front Stabilizer Installation
Slide both Front Left/Right Stabilizer End Caps (55, 58) onto each end of the Front Stabilizer
(56). Position the Front Stabilizer (56) in front of Main Frame (63) and align bolt holes.
Attach the Front Stabilizer (56) onto the front curve of the Main Frame (63) with two M8 Cap
Nuts (53), two
Ø
8 Curve Washers (54), and two M8x55 Carriage Bolts (57). Tighten bolts
and nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
Tool:
Multi Hex Tool with Phillips Screwdriver
2 Cap Nuts (M8)
2 Washers (
Ø
8)
2 Carriage Bolts (M8x55)
