Sport-Tec Runner RUN2011/T-PC, Manual

Page: 242 / 270

Rev.16/2022
59
RUNNER srl
Via G. di Vittorio n. 391 - 41032 Cavezzo (MO) Italia Tel. +39 0535 58447
runner@runneritaly.it www.runneritaly.it
5.11.2 Machine Data
It’s possible to see or set up some values as:
Total (km): See the total km of machine;
Partial (km): See the km made from last extraordinary lubrication;
Partial value setting (km): See / set up the km when the treadmill must make the
extraordinary lubrication;
Last extraordinary lub. (km): See the km when the treadmill made last extraordinary
lubrication;
Pumps number to change oil can: Pumps number after that the oil can alarm turns on;
Oil can pumps number: See / reset the oil can pumps number (one every turning on
operation);
Wait self lubrication (sec): Waiting time to make extraordinary lubrication operations;
Make extraordinary lub. in the next
start:
If “ON” the treadmill makes an extraordinary lubrication in the
next start even if the necessary km are not reached;
Extraordinary lubrication pumps
number: Number of oil pumps during the extraordinary lubrication;
Time next reset (hh:mm:ss): Count down timer of inclination motor reset;
Forced incline range reset (hh): Time after that the inclination motor makes an automatically
reset, without moving the running belt, to cancel moving errors;
Time total functioning (mm): See the time total functioning of machine;
Max time exercise (mm): See / set up the maximum time of each exercise;
Calories default exercise (KCal) See / set up the default calories to burn during exercise;
Exercise default distance (km) See / set up the default distance of the exercise;
Exercise default minutes See / set up the default minutes of the exercise;
Multiplicative coefficient calories: See / set up the value to change the calories calculation;