Spokey 838400, User Manual

Page: 6 / 48

5 www.spokey.pl
www.spokey.pl
www.spokey.eu
www.spokey.pl
USER’S GUIDE
NOTES Please keep this operation manual for future use. This exercise machine is intended for home use only.
SAFETY REMARKS

Prior to the assembly of the device and training, read carefully this
instruction manual. Safe and effective use of the device can be
guaranteed only if it is assembled, maintained, and used appropriately,
in a manner described in the manual. If you are not the user, please
provide all the users with this instruction and inform them about all
possible hazards and precautions.

Prior to starting with any exercises, please consult a doctor in order to
make sure that there are no mental or physical conditions that could be
harmful to your health and safety. The consultancy with a doctor may also
protect you against an inappropriate use of the device. A doctor will
specify whether taking drugs that would have an effect on pulse, pressure
or cholesterol level is justified.

Pay attention to your body signals. Inappropriate or excessive training
may have a negative influence on your health. Immediately stop
exercising if any of the following symptoms occurs: pain, chest
constriction, irregular pulse, exceptional shortness of breath, faints,
vertigo, nausea. If any of the above symptoms occurs, contact your
doctor immediately and give up training until then.

Children and animals should be kept away from the device. The device
is intended only and exclusively for adults.

The device should be placed on a straight, stable and tough surface,
protected with a mat or a carpet. For the sake of safety, 2 m of free space,
needed for a safe usage, should be left to each side around the device.
Prior to starting any exercises, make sure that all the bolts and nuts are
tightly fitted. Please, pay special attention to the parts that are prone to
wearing out the most.

An appropriate safety level of this device may by guaranteed only if it is
subject to regular service and inspection.

The device should be always used in accordance with its purpose.
Should during the assembly or use any of the parts appear to be faulty
or make alarming sounds, stop using the exerciser and have it serviced .
You must not use a damaged device.

During training, wear appropriate clothes. Avoid loose clothes that could
get caught in the device or such that could restrict or even make
movement impossible. It is also advised to exercise in appropriate sport
shoes. At the beginning, set a slow pace. During exercises, hold
handgrips and do not leave the saddle.

The bicycle is intended for home use. Maximum a
llowed user’s body
weight amounts to 120 kg.

Take special precautions while lifting and moving the device. The device
should be always moved by two persons. While lifting or moving the
equipment, maintain an appropriate posture so as to avoid backbone
damage.

The equipment was counted among class H and C and is intended for
home use exclusively. It cannot be used as a therapeutic or rehabilitation
equipment.

While assembling the device, strictly follow the enclosed instruction and
use only the parts included in the set. Prior to the assembly, check
whether the set contains all the parts that the enclosed list includes.

It is advised against leaving control devices, which could restrict
movement, in such a position that any of the elements sticks out.
Warning: prior to starting a training on this device, read the instruction
manual carefully.we do not hold responsibility for injuries or damages to
objects caused by an inappropriate use of this product. Body injuries may
happen due to an inappropriate or too intensive training.
TECHNICAL SPECIFICATIONS
Net weight
– 43 kg, Flywheel – 6 kg
Dimensions of the assembled exercise machine
– 130 x 60 x 158 cm
Maximum weight of the user
– 120 kg
The equipment is designed for full body exercise
LIST OF PARTS
Diagram
– p. 37
NO. NAME qty NO. NAME qty NO. NAME qty
1 Main frame 1 37 Console connection wire 1 69
Circlip shaft Φ10
1
2 Front stabilizer 1 38
Allen C.K.S. half thread screw
M8x50x20
4 70 Circlip shaft fixed piece 1
3 Rear stabilizer 1 39
Spring washer Φ8
10 71 Circlip shaft fixed piece 1
4 Upright post 1 40
Flat washer Φ8.5x Φ20xt1.5
12 72 Crank set 2
7 Body arm set 1 41
Curved washer Φ8.5xR25xt2.0 5
73 Disc cover 2
8 Body arm(L) 1 42
Allen C.K.S. half thread screw
M8x63x20
2 74
Dis Φ378.6x32
2
9 Body arm(R) 1 43 Hex self-locking nut M8 11 75
Belt pulle Φ263.7x22.2y
1
10 Pedal supporter(L/R) 1 44
Allen C.K.S. full thread screw
M8x20
10 76
Crank axle Φ17x111.3
1
11 Handlebars 1 45
Philips C.K.S. self-tapping screw
ST4x16
24 77
Circlip for shaft Φ17
2
12 Console fixed piece 1 46
Philips pan head full thread
screw M4x6
4 78
Allen C.K.S. full thread screw 5/16-
18UNC-1"
2
13 Console 1 47
Wave spring washer Φ15
4 79 Fixed magnet set 1
14 Upright post cover 1 48
Allen C.K.S. half thread screw
M8x40x20
4 80
Philips C.K.S. self-tapping screw
ST4x12
1
15 Bottle holder 1 49 carriage screw M10x50x20 4 81 Brake tension spring 1
16
Axle Φ15x311.5
1 50
Flat washer Φ10
4 82
Foam grip Φ30xt3.0x350
2
17 Pedal(L) 1 51 Hex locking nut M10 5 83
Pipe plug Φ32xt1.5
2
18 Pedal(R) 1 52
Allen C.K.S. hollow screw
Φ10x55-M6x20
2 84 Deep groove ball bearing 6002-2RS 8
21
Bushing Φ10.5x Φ14x10
1 53
Flat washer Φ6
2 85 Deep groove ball bearing 6000-2RS 4
22 Handlebar rotary knob 1 54
Allen C.K.S. full thread screw
M6x15
7 86 Motor cover(L) 1
23 Body Arm cover 1(Upper) 2 55
Philips C.K.S. full head screw
M5x10
4 87
Motor cover ®
1
EN