33
Spohn & Burkhardt
DRAFT
Replace the air filter (
5
) as follows:
1. Undo the 6 fastening screws and remove the air filter (
5
) from the housing (
1
)
2. Fit the new air filter (
5
) to the housing (
1
) and fasten the air filter (
5
) using the 4 fastening screws.
6.5. Replacing filters
Figure 21.
1
5.2
5.3
5.3
Replacing filters
Replacing filters
Replace clogged filters (
5.2
) as follows:
1. Release the ventilation grille (
5.1
) from the holder by pressing the clips (
5.3
) upward.
2. Take the filter (
5.2
) out of the ventilation grille (
5.1
).
3. Place the new filter (
5.2
) in the ventilation grille (
5.1
).
4. Clamp the ventilation grille (
5.1
) with the filter (
5.2
) back in the holder.
Summary of Contents for FS Series
