Spohn & Burkhardt FS Series, Operating Instructions Manual

Page: 123 / 132

31
Spohn & Burkhardt
DRAFT
Rotary switch/but-
ton
Function
"Temperature" rotary switch
Turn the "Temperature" rotary switch (
12
) to the left or right to set the required
temperature.
"Fan" rotary switch
Turn the "Fan" rotary switch (
14
) to the left or right to set the required fan speed.
"Off" – the fan is switched off.
"Auto" – the fan speed is controlled automatically.
"Hi" – highest fan speed.
The fan speed can be adjusted in steps between "Auto" and "Hi".
"Defrost" button
Press the "Defrost" button (
13
),
The heater and the maximum fan speed are set to remove ice or condensation.
Press the "Defrost" button (
13
) again to switch off the "Defrost" function.
"Error" warning light
The "Error" warning light (
15
) illuminates if an error occurs.
6. Servicing
Danger!
All tasks on the device are only allowed to be undertaken by specialist personnel taking
into account the relevant safety regulations. Always pay attention to the safety instruc-
tions in
chapter 1. “Safety”, page 22.
Servicing measure Interval
Function test before starting work
Visual inspection/cleaning regularly
Check screw joints regularly
Function test regularly
Replace filters every 250 to 500 hours of operation(depending on
the degree of soiling)
Replace ventilation grilles if it is heavily soiled or defective
Replace air outlet nozzles if it is heavily soiled or defective
Inspection every 6 months