Installation and Maintenance Manual
System Configuration
44
Installation and Maintenance Manual v4/0615/10
x
Alt Gatekeeper
–
the IP address of the S8000/S716/5100/5108/NSG that you want the module to
register to if the first Gatekeeper fails)
x
TFTP, NFS, and DNS settings
–
these are typically the S8000/S716/5100/5108/NSG that the P308
is connected to.
x
Timezone - allows a Timezone to be set for each module individually.
x
Other settings
–
for entering additional application Startup Arguments.
x
TDM clock - to derive the clock from a call server, this is sometimes used for PDQ and Fax
machines.
5.
When ready select the Save Settings button. You will receive a message that a reboot is required.
6.
Select OK
7.
The Reboot Unit button will now be available at the bottom right, click on this button.
8.
A progress bar will be displayed during the reboot. If you have not changed the IP address of the
module you will be returned to the login screen, otherwise you need to enter the new IP address
into the browser to access the configuration web page again.
Please note that if a P308 registers with the Call Server entered in the Alternative Gateway field, in a case
where the Call Server it originally registered to is unavailable, and this Call Server becomes available
again, if required the P308 can be forced to unregister from the Alternative Gateway via Manager
Assist>System Utilities>IP Addresses. Tick the P308 required and select the Unregister button. The
module will go through the registration process performed during the initial installation and will register
with the Call Server entered its Gateway field, assuming that this Call Server is running and reachable.
Connecting a 5300 Phone Module
A Phone Module enables the connection of PCS 505, PCS 520 and 3
rd
party analogue handsets, including
analogue DECT devices, fax machines, modems etc to the system. All configuration information for each
individual analogue port is obtained from the system database and is stored in its RAM.
5330 Front View
5315 Front View
