Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
16
4
CONSOLE / COVERS
ASSEMBLY
1. Plug the Computer Cable (No.41) into Console Assembly (No.40).
Install the Console Assembly on top of the mast of the Console Mast
(No.2) (stuff rest cables into the mast tube), then firmly fasten 4
Tapping Screws (No.100) using the Screw Driver (No.137).
2. Install the Console Mast Cover (No.68L) & Console Mast Cover
(No.69R) to Chain Cover (No.70L) & Chain Cover (No.71R), firmly
fasten 4 Sheet Metal Screw (No.102) using the Screw Driver
(No.137).
3. Install one Handlebar Cover (No.79L) & one Handlebar Cover
(No.80R) onto the upper left Handgrip Stabilizer Assembly (No.11),
firmly fasten 2 Tapping Screws (No.100) & one Sheet Metal Screw
(No.102) using the Screw Driver (No.137). Repeat with the
Handlebar Cover (No.79L) & Handlebar Cover (No.80R) & upper
right Handgrip Stabilizer Assembly (No.11).
4. Plugin the Oval End Caps (No.59) onto the ends front stabilizer tube
of Main Frame (No.1).
5. Install the Track Slide Wheel Cover A (No.66) & the Track Slide
Wheel Cover B (No.67) onto the upper left Strap Hold Down (No.2),
fastening with two Tapping Screws (No.100) using the Screw Driver
(No.139). Repeat with the other 3 sets to the lower left, upper right,
and lower right of the Strap Hold Down (No.2).
6. Install the Beverage Holder (No.78) onto Strap Hold Down (No.2)
using 2 Tapping Screws (No.100)
HARDWARE
STEP 4
#100.
M5 × 10mm_
Tapping Screw
(18 pcs)
#102.
3.5 × 12mm_
Sheet Metal Screw
(6 pcs)
