Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
8
IMPORTANT
OPERATION INSTRUCTIONS
●
NEVER
operate this treadmill without reading and completely understanding the results of any
operational change you request from the computer console.
●
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
●
NEVER
use your treadmill during an electrical storm. Surges may occur that could damage treadmill
components.
●
Use caution while participating in other activities while walking on your treadmill; such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in the
center of the belt; which may result in serious injury.
●
NEVER
mount or dismount the treadmill while the belt is moving. Treadmills start with at a very low
speed and it is unnecessary to straddle the belt during startup. Simply standing on the belt during slow
acceleration is proper after you have learned to operate the unit.
●
Always hold on to a handrail or handle while making control changes (incline, speed, etc.).
●
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel
the buttons are not functioning properly with normal pressure contact your dealer.
SAFETY TETHER CORD
A safety tether cord is provided with this unit. It is a simple pin design that should be used at all times. It
is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will
stop tread-belt movement.
To Use:
1. Place the pin into position on the rectangle slotted metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the pin also secures the treadmill from
unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The pin
has a strong enough connection to minimize accidental, unexpected stopping. The clip should be
attached securely to make certain it does not come off. Be familiar with its function and limitations.
The treadmill will stop, depending on speed, with a one to two step coast anytime the pin is pulled
out of the console. Use the red Stop/Pause switch in normal operation
