Spirent SmartBits System Reference Manual Download Page 112

Page: 112 / 278

Chapter 9: Ethernet Cards

LAN Series Modules

104

SmartBits System Reference

LAN-3201x Series Modules

•

LAN-3201A SmartMetrics 1-port 1000 Mbps Multi-Mode module

•

LAN-3201As SmartMetrics 1-port 1000 Mbps Single-Mode module

•

LAN-3201B SmartMetrics 1-port 1000 Mbps GBIC

Card Type:

SmartMetrics Ethernet 1000 Mbps modules.

Where Used:

SMB-600 and SMB-6000B: LAN-3201A, LAN-3201As, LAN-3201B.

GBIC accessories (order 1 of each for LAN-3201B):

•

ACC-6002A MM – Gigabit Interface Converter (GBIC) Multi-Mode.

•

ACC-6003A SM – Gigabit Interface Converter (GBIC) Single-Mode.

Applications
Supported:

SmartWindow, SmartLib, SmartApplications, SmartFlow, and SmartMulticastIP.

Devices Tested:

Gigabit Ethernet routers and networks.

Test Objective:

A stream-based traffic generator to test erformance, conformance, and interoperability of
Layer 2 and Layer 3 devices based on industry standard RFCs testing.

Features:

•

Multi-protocol performance analysis system for networks and network devices with
Gigabit Ethernet interfaces.

•

Stream-based traffic generation and analysis.

•

Advanced tracking capabilties.

•

Histogram analysis of streams during long duration tests.

•

Generates/accepts 802.1p, 802.1q, and 802.3ac VLAN tagged frames.

•

Performance measuerment and interoperability testing for Layer 2 and Layer 3
devices.

•

Network Layer QoS analysis.

•

Generates and responds to 802.3x flow control commands.

•

Data Integrity Check optionally detects Bit Errors in Layer 3 forwarding devices.

•

1MB capture buffer enables logging and exporting of filtered events to protocol
analysis equipment.

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands