SPT-N11U and SPT-N12U Chassis Installation Instructions
Related Documentation
SPT-N11U and SPT-N12U Installation Instructions
|
17
P/N 71-008728 Rev A, August 2019
To insert the power cables:
1
Slide out the power cord retaining clip located above the socket.
2
Angle the retaining clip up and plug the power cord into the socket.
3
Slide the retaining clip to the location appropriate for your cord.
4
Push the retaining clip down over the cable.
The unit is now ready to be powered on and set up for operation. Refer to
Getting Started
with Spirent TestCenter
for information on operating your chassis for the first time.
Related Documentation
•
SPT-N11U/SPT-N12U Chassis Power Supply Installation Instructions
– Describes the
procedure to install and remove power supplies
•
Getting Started with Spirent TestCenter
– Provides hardware set up, software
installation, licensing, and software upgrade and downgrade instructions
.
•
Using the ACC-2017 Hypermetrics Single-slot Card Carrier
– Describes the
procedure for installing and removing test modules that require card carriers for use in
the SPT-N11U, SPT-N12U, and SPT-N4U chassis.
•
Using the ACC-2018 Hypermetrics Dual-slot Card Carrier
– Describes the procedure
for installing and removing test modules that require card carriers for use in the SPT-
N11U, SPT-N12U, and SPT-N4U chassis.
•
SPT-N11U and SPT-N12U
Fan Tray Replacement Instructions
– Describes the
procedure to replace the fan tray.
•
Spirent Hardware Reference
– Describes Spirent chassis, modules, and accessories.
Information is provided on module LEDs, multiple chassis connections, cables, and
chassis commands. Basic information is provided on system administration functions
and diagnostics.
•
Release Notes
– Contain information that may affect product installation, test
configuration, or test results, including last-minute requirements or product changes.
It is highly recommended that you review all Release Notes before you install or use
the SPT-N11U/SPT-N12U chassis.
Spirent Customer Service Center
The Spirent Customer Service Center (
) includes a powerful
Knowledge Base. The Knowledge Base offers an easy-to-use browse mode and an
intelligent search. Log in with your user ID and password to gain access to additional
content that is available only to customers - user manuals, help files, release notes,
technical bulletins, and more. When you log in, you also gain access to software and
firmware downloads.
