RadioProcessor-G
HW_Trigger
(pin 3) When this input is set to logical 0 (for example by shorting it with pin 4), a hardware
trigger is produced. This has the same effects as issuing a trigger through software, although the hardware
trigger is more precise, since there are no software latencies involved.
HW_Reset
(pin 1) When this input is set to logical 0 (for example by shorting it with pin 2), the pulse
program is reset.
2017-09-04
20
www.spincore.com
Figure 8:
JP601: Hardware Trigger/Reset Header pin out
Table 4:
Shrouded IDC Output Header J601 signal list.
Pin number
Function
1
Reset
2
Ground
3
Trigger
4
Ground
5
LED0
6
Ground
7
LED1
8
Ground
9
LED2
10
Ground
