iSpin-NMR
IX. LabVIEW NMR Interface
Overview of SpinCore LabVIEW GUI Interface
SpinCore has developed an easy-to-use LabVIEW Graphical User Interface (GUI) that combines
the Single Pulse NMR, T1 Inversion Recovery, and CPMG interfaces into one interface. It allows
the user to run basic NMR experiments by simply setting the experiment parameters as described
elsewhere in this manual. Extra features in LabVIEW GUI include lightning fast resonance finder,
built-in FFT and phasing, CYCLOPS phase cycling experiments, 90 degree pulse width finder, and
continuous scan mode. The following two figures are screenchots of the LabVIEW NMR Inferface.
For more information see the LabVIEW manual at:
http://www.spincore.com/support/PBLV/PBLV_RP_NMRinterface_Manual.pdf
NOTE: A National Instruments license is not required to run the LabVIEW interface.
2020-07-21
25
www.spincore.com
Figure 16: Example of RadioProcessor LabVIEW Extensions User Interface.
