![background image](http://html1.mh-extra.com/html/spin/atf-2-basic/atf-2-basic_manual-for-use-and-maintenance_1347491020.webp)
19/11/2013
Vers. 1.1
20
Once you have changed the time as desired with the arrow keys, press ENTER and the display will show the
following screen.
This screen informs the user to turn the car on and to move (for vehicles in which this is possible) the shift lever so
as to allow the washing fluid to penetrate into all ducts of the transmission.
On the right side of the screen a progress bar and a digital clock indicate the elapsing of the washing time.
The screen will also show the temperature of the oil in the automatic transmission.
During this phase the filter on the station will retain all debris removed by the additive.
Once the washing phase is completed, turn off the car.
9.3.
Emptying of the cup for filter replacement and radiator cleaning (C)
With this operation, you begin to remove the old oil. The total removal will occur only with the following
operations.
Select icon (C) in the 'Manual' menu. You will get to the screen shown below.
In this phase, the station is set to collect used oil from the vehicle.
Start the engine in order to drain the oil from the sump and stop the engine immediately when from the used oil
ampoule air bubbles appear and the pressure gauge drops towards zero. This indicates that the oil sump has been
almost completely emptied.
The display will show the amount of oil collected from the sump (I) in the 'Old' field, whereas the bar and the other
numerical value (II) represent the total oil in the used oil internal tank.