SK599-AT5
Operating the truck
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
3-13
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
26. Switch outrigger beam right-hand rear in / out
Using this switch the outrigger beam on the right-hand at the rear moves in or out
(see
Crane manual
§ 5.2.2. Crane set-up
).
27. Safety switch outrigger control (locked)
Using this safety switch the outrigger control can be switched on or off.
First the lock must be pressed down to press the safety switch
(see
Crane manual
§ 5.2.2. Crane set-up
).
If the outrigger control is enabled,
switches 19 to 26
and the remote outrigger control
can be operated.
The spring load of the truck is disabled when the outrigger control is enabled.
28. Switch door window driver’s side
(
This switch enables the driver to move the window at the driver’s side up or down.
Operating the switch is only possible when the ignition is turned on.
29. Switch door window co-driver’s side
This switch enables the driver to move the window at the co-driver’s side up or down.
At the co-driver’s side there is also a switch mounted on the central console.
Operating the switch is only possible when the ignition is turned on
(
30. Switch cab lighting driver’s side
Using this switch the cab lighting on the driver’s side can be switched on or off.
31. Switch cab lighting co-driver’s side
Using this switch the cab lighting on the co-driver’s side can be switched on or off.
32. Switch steering system on-the-road / off-the-road
Using this switch the steering system can be switched to on-the-road mode and
off-the-road mode (see
§
).
To operate the steering system with the control panel for axle steering, it must be
switched from on-the-road mode to off-the-road mode.
33. Blinded
34. Indicator
(see
Table 3-1
(page 5 of 12)
