Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 395 / 531

ECDIS User Guide Routes
65900012 8-61
Route Display Settings
The Route Display Settings sub-menu
enables you to select the graphic display of
labels associated with the displayed route.
The following display settings are available:
•
Display Monitored Route - displays the
route currently being monitored. In
ECDIS mode this check box cannot be
switched off.
•
Critical Point labels - displays a label for
each critical point (CP1 etc.)
•
Leg bearings - displays bearing data of
each route leg in degrees
•
Planned speeds - displays own ship's
planned speed between each waypoint.
•
Waypoint labels - displays a label for each waypoint (WPT1 etc.)
•
Wheelover Type - determines how the wheelover lines are drawn:

Parallel to next leg - the wheelover line is drawn parallel to the
next leg in the route.

Perpendicular to leg - the wheelover line is drawn at right angles
to the route leg that approaches the associated turn.
•
Wheelover labels - displays a numerical label for each wheelover
(WO(2) etc.)
•
Leg bearings - displays bearing data of each route leg in degrees.
•
Planned speeds - displays own ship's planned speed between each
waypoint.
•
XTD Alarm Lines - displays a series of XTD lines on the safety region.
When all display options are ticked the route is displayed as shown below.
The bottom of the Route Display Settings window shows a description of
the settings as the cursor moves over each setting text.