Sperry Marine Visionmaster FT ECDIS, User Manual

Page: 360 / 531

Routes ECDIS User Guide
8-26 65900012
Editor Table
The route editor table enables the operator to edit aspects of a route that
has been opened from the Edit Route folder and is displayed on screen.
Click on the Editor Table button in the Route tab of the
Edit Route sub menu to open the route editor table.
The route editor table displays the name of the route and lists all the route's
waypoint attributes and leg attributes as fields in a spreadsheet.
The two check boxes at the top of the table enable
the following display options to be made:

Waypoint Data - tick this box to only display columns containing
waypoint specific data

Leg Data - tick this box to only display columns containing leg
specific data
The four buttons to the right of the check boxes
enable the following route editing actions:

Add - adds a new waypoint to the end of the route.

Insert - inserts a new waypoint between two existing waypoints

Delete - deletes the selected waypoint from the route and redraws
the route

Reset - resets selected waypoint data to default values
To edit waypoint or leg data directly on screen do the following:
1. Click on a waypoint, the waypoint and its adjoining legs are
displayed in white. The rows displaying the data for the waypoint
and adjoining legs are highlighted in the table.
2. To move the waypoint hold down the left key and use the trackball
to drag the waypoint to the desired location.
3. To change the waypoint's turn radius click on the small dot at the
centre of the radius, hold down the left key and use the trackball to
increase or decrease the radius.
If changes to the route result in validation errors the Errors
button changes to displaying Errors with a yellow
background and the route name shown in an invalid colour (orange). Click
on the button to open a popup window that lists the validation errors, for
more information see Waypoints Tab Folder.