9
Table Top Series
BEFORE INITIAL START-UP
Disassembly and disposal
•
Dispose of the dispenser in accordance with regional disposal regulations.
•
This dispenser is subject to the Waste Electrical and Electronic Equipment Directive
(WEEE/EU directive) and must not be disposed of together with normal domestic waste.
•
The packaging is made from various recyclable materials. After installing the dispenser, please contact the
waste disposal department of your local authority to check what options are available for recycling the
packaging material or disposing of it in an environmentally friendly way.
Installation and connection conditions
• When installing the appliance refer to the Spengler Quick Installation Guide which is included with the
appliance for step-by-step instructions.
• When connecting the appliance and/or refrigerator unit to the mains power supply make sure that the
ratings label (shown above) matches the supply voltage for the installation location.
• When installing the appliance required free (unobstructed) dimensions are:
-
Behind: 10cm (for hose and power connection and ventilation)
-
Above: 32cm (for access and ingredient refilling)
-
In front: 48cm (for door opening and interior access)
• For the optimal performance of the appliance these hydraulic (domestic water connection) parameters shall
not be exceeded:
-
Maximum inlet water pressure : 500KPa (5Bar)
-
Minimum inlet water pressure: 200KPa (2Bar)
-
Maximum ambient working temperature: 40ºC
-
Minimum ambient working temperature: 10ºC
