EN
4
Charging the Headset Battery Pack
The included 7.4V 1800mAh Li-Po battery has an integraded LED power meter. Press
the button on the side of the battery and a series of 4 LED’s will iluminate depending on
the state of your batteries charge. When only one LED is illuminated, charge the battery.
1.
Connect the Li-Po battery pack balance lead to your battery charger.
If your battery charger requires you to connect the battery power
for charging, use the included battery charge adapter.
2.
Follow your battery charger instructions for charging a 7.4V 1800mAh Li-Po
battery.
Low Battery Warning:
The head set will emit a steady BEEP.....BEEP.....if input
voltage drops below 6.8V.
Focal FPV Wireless Headset Functions
LED Power
Meter
Test Button
7.4V 1800mAh Li-Po battery
w/Power Meter
Antenna Connection
Display Control
Channel Select/Head
Tracker Reset
Fan
Top
Fan Power Port
Power In
AV In/Out
Right Side
Data Port
(wired head tracking)
RX Power Switch
Video Receiver
Compartment
IPD Adjustment
Headphone Jack
Bottom
