EN
3
2
User Guide
The Spektrum™ AR9140T, AR12310T and AR20310T PowerSafe™ telemetry
receivers offer the ultimate solution for powering high-current draw radio systems.
In aircraft with multiple high-current draw servos (e.g. giant-scale aircraft, jets, etc.),
the PowerSafe receivers can provide peak current of up to 50 amps and offers
true dual battery redundancy and a fail-on soft switch for the ultimate in reliability.
By locating up to three remote receivers throughout the aircraft, the RF link can be
optimized in even the most demanding aircraft installations that have significant
conductive materials like carbon, stainless steel bypass tubes, tuned exhausts,
etc. For models high in carbon fiber content the SPM9646 DSMX
®
Carbon Fiber
Remote Receiver is compatible with these PowerSafe receivers.
These telemetry receivers feature 4 integrated telemetry ports that are
compatible with Spektrum telemetry capable transmitters.
NOTICE:
The Spektrum PowerSafe telemetry receivers are not compatible with the
Spektrum/JR/FUTABA DSM2 modules
For information on Spektrum Telemetry Sensors visit:
http://www.spektrumrc.com
Applications
•
Giant-scale aircraft
•
Jets with multiple high-current draw servos
•
Scale aircraft with multiple high-current draw servos and accessories
(e.g. lights, ESCs, air valves, etc.)
•
Scale helicopters
Features
•
Integrated full range telemetry
•
True dual battery redundancy—each battery is isolated and if one fails/
shorts the other takes over.
•
Utilizes up to three remote receivers for the ultimate RF link in even the most
demanding applications.
•
Up to 35 amps continuous and 50 amps peak current handling capability
•
Fail-on soft switch in case the switch is damaged
•
Two types of failsafe—SmartSafe
™
(throttle only) and preset failsafe (all servos)
•
QuickConnect™ technology—if a power interruption (brownout) occurs,
the system
reconnects in less than 1/2 second
•
Flight Log compatible
•
Heavy 13AWG dual battery leads with pre-wired E-flite
®
EC3
™
connectors
•
2048 resolution
•
Compatible with X-Plus™ modules (AR20310T has the X-Plus
module built in)
IMPORTANT:
The PowerSafe receiver has a power distribution center that
provides up to 35-amps continuous and 50-amps peak current to power your
system. The AR9140T, AR12310T and AR20310T PowerSafe receivers use up
to three (1 minimum connected to operate) remotely mounted receivers that can
be optimally placed in your aircraft providing the best possible RF link in the most
demanding conditions.
IMPORTANT:
Aircraft using this receiver should use AMA sactioned flying fields
and follow the AMA safety codes at https://www.modelaircraft.org/files/105.pdf
