EN
6
Failsafe
Failsafe position is set during binding. In the unlikely event that the radio link
is lost during use, the receiver will drive all channels to its pre-programmed
failsafe position.
Smart Safe + Hold Last is the default setting. If Preset Failsafe is desired,
enter the forward programming menu in your forward programming capable
Spektrum™ transmitter or Spektrum PC programmer and USB cable and select
Preset Failsafe.
Sma Hold Last
If loss of signal occurs, SmartSafe™ technology moves the throttle channel to
its preset failsafe position (low throttle) that was set during binding. All other
channels hold their last position. When the receiver detects signal from the
transmitter, normal aircraft operation resumes.
Preset Failsafe
Preset failsafe is ideal for sailplanes, allowing the aircraft to automatically
dethermalize if the signal is lost. With preset failsafe, all channels go to their
preset failsafe positions if the signal is lost, preventing a fl yaway. When the
receiver detects signal from the transmitter, normal aircraft operation resumes.
Testing Failsafe
Secure the aircraft on the ground and remove the propellers. Test Failsafe
by turning the transmitter off and noting how the receiver drives the control
surfaces.
Receiver Power Only
• With SmartSafe or Preset Failsafe, when the receiver only is turned on (no
transmitter signal is present), the throttle channel has no output, to avoid
operating or arming the electronic speed control.
• All other channels have no output until the receiver has linked to the
transmitter.
Telemetry
The AR6610T features full range telemetry and will provide receiver battery
voltage, fl ight log data, and vario and altitude data without any additional
sensors. Additionally, Spektrum Smart devices can be connected through the
SRXL2 connections to provide additional telemetry data. Additional telemetry
devices such as voltage sensors can be connected to the volt port, and XBus
telemetry sensors can be connected through the XBus connector.
