Manual for clima BSK4-F / clima BSK4-F230
LON fire damper actuator 4 ports
Order No.: 421 404 / 421 405
2.2. Mounting
The device is designed for Safety Extra Low Voltage (SELV).
Electrical devices must be assembled and installed by trained personnel
only.
Relevant standards, guidelines, regulations and provisions of the
respective country must be observed when planning and installing
electrical systems.
The device specifications must be observed.
The installation of the input module is in hollow floors, suspended ceilings or directly to
ventilation ducts. The existing mounting points can be found in the following figure:
The included cable entries provide a IP65 degree of protection with
adequate strain relief. To increase the strain relief alternatively cable
glands can be used.
Version 3.01
Page 11 / 39
01.09.2020
