Manual for ombra BST
LON slat angle automat
Order No.: 341 298
NOTE: Denotes application recommendations which must be followed
in order to ensure correct operation of the system. However, failure to
follow the instructions given does not result in damage to the facility.
1.5. Safety instructions
Please observe the following safety instructions:
Electrical devices must be assembled and installed by trained
personnel only.
Operation of the device is determined by the application software.
Only software which has been approved by spega should be used
for this device.
The system integrator should ensure that the software and
relevant parameterization correspond with the wiring and
intended use of the device.
Please observe the relevant local standards, guidelines and
regulations when planning and installing electrical devices.
1.6. Order information
Order number
Description
341 298
ombra BST
Slat angle machine
Version 1.00
Page 5 / 34
08.09.2020
