6
SpeedTech Lights, Inc © 2019
K-FORCE
®
SUPER TD 47
FULL LIGHT BAR
Foot Brackets (Included)
•
This unit comes included with adjustable Foot Brackets.
•
Adjust the Foot Brackets along the length of the aluminum track accordingly
to create a flat, even contact with the roof.
Universal Mounting Brackets (Included)
•
This unit comes included with Universal Mounting Brackets.
•
Adjust the Foot Brackets along the length of the aluminum track accordingly to
reach the Universal Bracket and create a flat, even contact with the roof.
•
Attach the Universal Bracket to the Light Bar Foot Bracket using the included I-bolt.
•
Secure the Universal Bracket to the vehicle via the 2 pre-drilled holes, and user
supplied screws at the bottom of the Bracket.
•
Tighten the I-bolt equally on both sides to tightly secure everything together.
Vehicle Specific Mounting Brackets (Sold Separately)
•
Adjust the Foot Brackets along the length of the aluminum track accordingly to
reach the Universal Bracket and create a flat, even contact with the roof.
•
Attach the Vehicle Specific Bracket to the Light Bar Foot Bracket using the
included I-bolt.
•
Secure the Vehicle Specific Bracket to the vehicle via the 2 pre-drilled holes, and
user supplied screws at the bottom of the Bracket.
•
Tighten the I-bolt equally on both sides to tightly secure everything together.
Stud Mount (Sold Separately)
•
Loosen the hardware securing the Foot Bracket to the Light Bar and remove
the Foot Bracket from the Light Bar.
•
Place the main mounting bolt through the Stud Mount.
•
Use the screws that were securing each Magnet Mount to the Light Bar and
attach the Stud Mount to the Light Bar.
•
Fully tighten the hardware to secure the Stud Mount to the Light Bar.
Headache Rack Mount (Sold Separately)
•
Loosen the hardware securing the Foot Brackets to the Light Bar and remove
the Foot Brackets from the Light Bar.
•
Use the screws that were securing each Foot Brackets to the Light Bar and
attach the Headache Rack Bracket to the Light Bar using the two vertical
cutaways on the Headache Rack Mount. This secures the Headache Rack
Mount to the Light Bar.
•
The Headache Rack Mount may then be directly mounted. Or, by using the
supplied secondary piece, you may “sandwich” the back rack with 2 user
supplied nuts and bolts.
