19
Note: Window parameters and crop parameters can be saved separately
in the parameters of the signal source which the output selected. The
parameters of each input signal source is saved without interference.
Window Setting Shortcut
To set window parameters in a convenient way, press
PART
– the partial
window switch. The switch is turned on when the button is lighted up. Press and
hold
PART
for one second to enter the shortcut menu.
Figure 11-2 shows the window parameters of the selected signal under the
preview output channel. Turn the knob to change window width and height. Press
ENTER
to switch between window size and start position; press
PGM
to switch
between preview outputs and program outputs.
Press
ENTER
+
PART
to reset the window parameters of the signal which
the preview/program selected.
Crop
This function is to display the cropped part of an image. Users can change
crop size and position.
Figure 11-2 Window shortcut menu
