background image

22

Spektrum DX4r prO • tranSmitter inStructiOn manual

EN

Warranty and Service Contact Information 

Country  
of Purchase

horizon hobby 

Phone Number /  
Email Address

Address

United States  

of America

Horizon Service Center 

(Repairs and Repair Requests)

servicecenter.horizonhobby.com/

RequestForm/

4105 Fieldstone Rd 

Champaign, Illinois, 61822 USA

Horizon Product Support 

(Product Technical Assistance)

www.quickbase.com/db/

bghj7ey8c?a=GenNewRecord 

888-959-2305

Sales

[email protected] 

888-959-2305

United Kingdom

Service/Parts/Sales: 

Horizon Hobby Limited

[email protected]  

+44 (0) 1279 641 097

Units 1-4 Ployters Rd 

Staple Tye 

Harlow, Essex 

CM18 7NS, United Kingdom 

Germany

Horizon Technischer Service

[email protected]  

+49 (0) 4121 2655 100

Christian-Junge-Straße 1 

25337 Elmshorn, Germany

Sales: Horizon Hobby GmbH

France

Service/Parts/Sales: 

Horizon Hobby SAS

[email protected]  

+33 (0) 1 60 18 34 90

11 Rue Georges Charpak 

77127 Lieusaint, France

China

Service/Parts/Sales: 

Horizon Hobby - China

[email protected]  

+86 (021) 5180 9868

Room 506, No. 97 Changshou Rd. 

Shanghai, China 200060

Non-Warranty Service
Should your service not be covered by warranty, service 
will be completed and payment will be required with-
out notification or estimate of the expense unless the 
expense exceeds 50% of the retail purchase cost.

 By sub-

mitting the item for service you are agreeing to payment of the 
service without notification. Service estimates are available upon 
request. You must include this request with your item submitted 
for service. Non-warranty service estimates will be billed a mini-
mum of 1/2 hour of labor. In addition you will be billed for return 
freight. Horizon accepts money orders and cashier’s checks, as 
well as Visa, MasterCard, American Express, and Discover cards. 
By submitting any item to Horizon for service, you are agreeing  

to Horizon’s Terms and Conditions found on our website  
http://www.horizonhobby.com/content/_service-center_ 
render-service-center. 

ATTENTION: horizon service is limited to Product  
compliant in the country of use and ownership. If re-
ceived, a non-compliant product will not be serviced.  
Further, the sender will be responsible for arranging  
return shipment of the un-serviced product, through  
a carrier of the sender’s choice and at the sender’s  
expense. horizon will hold non-compliant product  
for a period of 60 days from notification, after  
which it will be discarded.

This device complies with part 15 of the FCC rules. Operation 
is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause 
undesired operation.

CAUTION:

 Changes or modifications not expressly 

approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technol-
ogy which has been tested and found to be compliant with 
the applicable regulations governing a radio transmitter in the 
2.400GHz to 2.4835GHz frequency range.

ANTENNA SEPARATION DISTANCE

When operating your Spektrum transmitter, please be sure  
to maintain a separation distance of at least 5 cm between  
your body (excluding fingers, hands, wrists, ankles and feet)  
and the antenna to meet RF exposure safety requirements  
as determined by FCC regulations.
The illustrations below show the approximate 5 cm  
RF exposure area and typical hand placement when  
operating your Spektrum transmitter.

FCC INFORMATION

Summary of Contents for DX4R Pro

























Reviews: