1
Innovative Power + Data Solutions
10 Mountain View Drive • Shelton, CT 06484 • P:800.521.3175 • F:203.924.6687 • www.electri-cable.com
©
ECA– October 2013—Product specifications subject to change without notice
INSTALL-DRIFTER-101413
Instructions for use:
1. Place Drifter at the location for use. Disengage the magnetic catch, uncoil the cord from the base and plug
into a standard 120V power source.
2. To store the unit, wind the cord around the feet and engage the magnetic catch.
Drifter™ Installation Instructions
and Technical Information
DRIFTER™
Diameter: 10.00” inches
Height: 2.87” inches
Weight – 6
Lbs.
Mounting Kit:
Short screw:
.75”-1.25” surface thickness
Long screw:
1.25”-1.50” surface thickness
Fig. 2
Fig. 1
Moun ng Plate
Washer
Thumb screw
Instructions for securing:
1. If you are securing the Drifter to the work surface, select the correct Thumb screw for the surface thickness
(Fig. 1). Next, place the washer and plate over the screw in that order (Fig. 2), and from below the work surface
thread the screw into the anchor stud. Tighten the thumbscrew until the Drifter is secure.
