background image

Important

Before you begin, read and comply with all safety and operating instructions, 

and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.  To 

report information regarding missing parts or damage, to purchase parts or acces-

sories, or if you have any questions, please contact us.

www.spectrumfurniture.com

800-235-1262, 715-723-6750

Thank you for purchasing Spectrum products!

Rack Cabinet

Figure 1

Cabinet rear

(open-back)

Cabinet front

(instructor-side)

Side hatch

Figure 2

Glide posts

(to dock cabinet 

to lectern)

The removable rack cabinet (14RU front, 10RU rear) 

simplifies installation and provides the ability to integrate 

equipment remotely, and dock into the lectern at a later date.
Note:  Roller glides under the cabinet provide easy 

repositioning for quick and easy access (not intended for 

long-range transport).

0119056R1 Page 1 of 4

Assembly Instructions

Rack Cabinet

for Freedom XRS Elite

55297

Summary of Contents for 55297

Page 1: ...00 235 1262 715 723 6750 Thank you for purchasing Spectrum products Rack Cabinet Figure 1 Cabinet rear open back Cabinet front instructor side Side hatch Figure 2 Glide posts to dock cabinet to lectern The removable rack cabinet 14RU front 10RU rear simplifies installation and provides the ability to integrate equipment remotely and dock into the lectern at a later date Note Roller glides under th...

Page 2: ...the cabinet on the left or right side of the lectern Figure 3 2 Engage the keyhole slots and slide the cabinet toward the outside leg of the lectern to secure 3 Lock the cabinet lock pawl near the floor Bottom of Rack cabinet Lock pawl secures cabinet to lectern Keyed lock one on each side Keyed lock one on each side The symmetrical door can easily be removed or switched to be hinged from left or ...

Page 3: ...th Overall height 10RU available rail shown in outer position Note Check the dimen sions of all equipment before installation Rack Rails If necessary the rack rails can be repositioned to accommodate rack mount components with protruding controls knobs Figure 6 To relocate remove the 1 4 20 locknuts and install on the 2nd set of studs Figure 6 0119056R1 Page 3 of 4 7 16 or Adjustable wrench Tools ...

Page 4: ... Cabinet Leave enough slack in the cords and wires from the rack cabinet to pull the rack cabinet out from the lectern Figure 7 Wiring 0119056R1 Page 4 of 4 925 FIRST AVENUE CHIPPEWA FALLS WI 54729 800 235 1262 715 723 6750 WWW SPECTRUMFURNITURE COM ...

Reviews: