LT-24 Laptop Cart (H3)
#55174
Instructions:
(72) 052608
Velcro Wrap
(24) 052597-8
2" Velcro Hook & Loop
Before you begin, please make sure all parts and proper quantities are included.
Any parts damaged during shipment must be reported within 15 days of receipt.
To report information regarding damages or if you have any questions, please
call 1-800-235-1262.
Tools Required:
Adjustable Wrench
(4) 044555
Hole Plug
(2) 035252
Pinetree
Button
(2) 055001
Handle Mount
(2) 037282
1/4-20 Nut
Fiberlock
(10) 052605
1/4-20 x 15mm JC Bolts
(1) 052577B
Handle Gusset
(1) 025039
Allen Wrench
Cord Reel:
DESIGNED FOR INDOOR USE ONLY
Spectrum carts and lecterns are designed and constructed for indoor
use only. Moving or using outdoors or on excessively rough
surfaces may cause damage to the cart or casters and may void the
warranty. If an outdoor application is desired, please contact us to
discuss potential custom design solutions.
053465XR6 Page 1 of 4
A. Once the unit is unloaded from the skid, insert the cord reel plug through the lower grommet.
Figure 1
.
B. Plug the Cycle Charger plug into the Cord Reel power plug as shown.
C. Plug the second Cycle Charger plug into the Power Strip as shown. Additional accessories can now be powered from the Power Strip.
Note:
The Master Switch on the Cycle Charger needs to be switched to the 'AUX' position to use the Power Strip.
Connect Plugs
1.
Cord Reel
To wall plug
Power Plugs from
Cycle Charger
Power Strip (use for additional accessories)
From Cord Reel
(through lower grommet)
Figure 1
Rear View
