Assembly Instructions
Phillips
screwdriver
Tools
Required
Drill with
Phillips driver
or
057943R5 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Evolution Corner Connector (24”D)
38917
(4) 0102049
Z-bracket
(10) 026064
1/4-20 x 5/8” PHMS
(4) 050524
#8 x 3/4” PH TEK screw
(2) 036207
Flip-top support bracket
1. Attach Brackets & Cord Channel
1. Place the worksurface assembly face-down onto a non-abrasive surface.
2. Attach the two Flip-top support brackets and Cord Channel with 1/4-20 x 5/8” PHM
screws as shown in
Figure 1
.
Figure 1
Worksurface
assembly
(1) 057938
Worksurface assembly
(1) 044234
Cord channel
Flip-top
support
brackets
Cord channel
(5) 1/4-20 x 5/8”
PHMS
