057859R10 Page 1 of 5
Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 057922
Chair rail bracket #1
(3) 043771
1/4-20 x 2” FHMS
(1) 025069
Glide wrench
Evolution Desk 24”D
Evolution Desk 24”D
(1) 057890
Chair rail bracket #2
(for 60”, and 72” desks only)
Figure 1
Flip-top
Chair rail bracket #2
Chair rail bracket #1
Worksurface
(4) 037779
5/16-18 x 1” Glide
(2) 052463
Unit-to-unit bracket
(2) Leg
(1) Worksurface
(1) Chair rail
(1) Cord channel /
Modesty panel
38912ADJ - 36”W
38912ADJ - 36”W
38915ADJ - 60”W
38915ADJ - 60”W
38916ADJ - 72”W
38916ADJ - 72”W
Attach chair rail bracket (60” & 72” desks only)
1. Place the worksurface face-down onto a non-abrasive surface.
2. Orient and attach the chair rail bracket to the center of the worksurface
as shown in
Figure 1
with (2) 1/4-20 x 5/8” PHM screws.
1
Assembly tip: Do not tighten component
fasteners completely until all have been
installed. Keeping them loose will help with
alignment between parts during assembly.
X2
026064 (black)
1/4-20 x 5/8” PHMS
(10) 36”, (12) 60”, 72”
026011
1/4-20 x 2” FHMS
(2) 36”, (3) 60”, 72”
(2) 1/4-20 x 5/8” PHMS
(for threaded inserts)
or
(2) #14 x 7/8” PHSM
(for pilot holes)
