0190035R1 Page 1 of 8
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Phillips
Screwdriver
Tools Required
Flex Flip Tables
37317
Hex wrench
(included
with base)
Figure 1A
(8) #14 x 7/8”
PHSM
Cables
Leg
mechanism
Worksurface
Figure 1B
Secure cables with (4) PHSM
screws & cable clips
(included with table legs)
Cable
Cable clip
Release
handle
1. Place worksurface face-down onto a non-abrasive surface.
2. Orient the leg mechanisms and release handle as shown and
align with the worksurface mounting holes.
Figure 1A
.
3. Attach the leg mechanisms and release handle to the worksurface
using (20) #14 x 7/8” PHSM screws and tighten securely.
4. Secure the cables to the worksurface with the included clips, (4)
#8 x 3/4” PHSM screws, and pre-drilled holes.
Figure 1B
.
Worksurface
1. Attach leg mechanisms & release to worksurface
(20) 0101382
#14 x 7/8” PHSM screw
(1) Worksurface
(1) 0106921
Table Base
(4) #14 x 7/8”
PHSM
User-side
(2) 053453
3/4” x 12” Hook and loop strap
