Tools Required
Phillips
Screwdriver
7/16”
Wrench
Assembly Instructions
0190576R1 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Flip-up Shelf for 3D2GO
™
Printer Cart
37137
1. Installation
1. Determine the side of the unit the shelf will go on. (Left or right).
2. Align each channel bracket with the leg mounting holes.
Figure 1
.
(The two sets of 3 smaller holes will face outward.)
3. Install (1) 1/4-20 x 5/8” PHM screw at the top of each bracket.
4. Install (1) 1/4-20 x 2-1/2” PHM screw and Keps nut on the bottom
of each bracket.
Figure 1
(2) 026064
1/4-20 x 5/8”
PHMS
(2) 0106543
1/4-20 Keps nut
(1) 039622
2” Grommet
(2) 0190564
1/4-20 x 2-1/2”
PHMS
(4) 0100167
8-32 x 1/2” PH
Thread-cutting
screw
Note: Only one flip-up shelf, or one
handle will attach to each side-not
both at the same time.
(1) 0119425
Worksurface
(2) 056886
Shelf bracket
(2) 0135022
Channel bracket
(2) 0109646
Shelf shim
(8) #8 x 1”
PHSM screw
Flip-up Shelf Assembly
Channel Bracket
1/4-20 Keps nut
1/4-20 x 2-1/2” PHMS
1/4-20 Keps nut
1/4-20 x 2-1/2” PHMS
1/4-20 x 5/8” PHMS
1/4-20 x 5/8” PHMS
Leg
Leg
Channel Bracket
