SERVOPRO CHROMA Gas Analyser
68
04400001A / Revision 7
Column
Explanation
Name
Name of the peak.
Avr
Average that can be used to calculate the impurity value of the
peak. An average of 1 disables the feature.
Start
The starting time of a peak.
End
The Ending time of a peak.
Det.
The detector number used to trend the peak. Refer to the
CONFIGURATION-ADVANCED MENU
for the detector
number association.
Alarm 1
When the peak exceeds this value, the alarm 1 will be activated.
Alarm 2
When the peak exceeds this value, the alarm 2 will be activated.
Range 2
Range 2 value is the maximum full scale of the analyser.
Range 1
Shows the factor selected to re-scale Range 2 to the (lower)
Range 1.
Unit
Unit of the peak (PPM, PPB or %)
Sample
loop
Volume of sample introduced in ccs (ml)
Table 20 : Peak Configuration Columns
Polarity
The polarity: Follower or Inverter.
Gain
The peak gain.
Plasma/generator Pwr Detector
Generator
Power
used
for
the
corresponding peak.
Pre-Amp
Shows the stage of the Pre-Amp for the
corresponding peak.
Table 21 : Peak Data
Push Button
Hot key
Functions
Add Peak
F2
Add a peak to the grid
Delete selected peak
F3
Delete the peak selected in the grid.
Save peak table
F4
Save the peak grid
Print Peak Table
Alt-F2
Print the peak grid
Peak Detection Cfg.
None
Brings the Peak Detection Configuration
Menu
Table 22 : Peak Configuration Menu
