![Spectris Particle Measuring Systems IsoAir 310P Operation Manual Download Page 82](http://html.mh-extra.com/html/spectris/particle-measuring-systems-isoair-310p/particle-measuring-systems-isoair-310p_operation-manual_1344042082.webp)
Wi-Fi Sensor Checklist
Appendix C Wi-Fi Configuration
IsoAir 310P Aerosol Particle Sensor Operations Manual
Page C-13
Wi-Fi Sensor Checklist
Table
C-3
Sensor Settings
Sensor ID/Description
IP Address
Net mask
Gateway (may be the router address)
DNS Server (may be same as Gateway)
Wi-Fi SSID
Security (e.g., WPA-PSK, WEP-64)
Security Password
Other
Table
C-4
Setting Checklist
Check
Item
IsoAir 310P set to Wi-Fi mode?
IP Address set in IsoAir 310P?
IsoAir 310P re-booted with new settings?
IP Address set in Wi-Fi bridge? (Use the same address as set in the
IsoAir 310P in the previous step.)
Net mask set in Wi-Fi bridge?
Gateway set in Wi-Fi bridge?
DNS Server set in Wi-Fi bridge?
SSID set in Wi-Fi bridge?
Security (e.g. WPA, WEP-64) set in Wi-Fi bridge?
Correct operating region set in Wi-Fi bridge? (This is needed outside
the United States, and it is set on the
WLAN Settings
page.)
All other required settings?
Security password set in Wi-Fi bridge?
Wi-Fi bridge re-booted and settings verified?