Page 2-6
Airnet II Particle Sensor Operations Manual
Chapter 2
Unpacking and Installation
Positioning or Mounting the Unit
The Airnet II particle sensor can be positioned so that it stands on its four feet
(Polycarbonate enclosure version only) or it can be mounted to a vertical surface with
a mounting bracket that attaches to the bottom of the sensor’s chassis with machine
screws (provided).
The Airnet II particle sensor is attached to a chosen surface with one of the following
four types of mounting bracket:
•
A horizontal mounting bracket for attaching to a horizontal surface
(Polycarbonate enclosure version only)
•
An S-shaped mounting bracket for attachment to a horizontal surface
(Polycarbonate enclosure version only)
•
An L-shaped mounting bracket for attachment to a vertical surface
•
A dovetail mounting bracket for attachment to a vertical surface (Polycarbonate
enclosure version only)
Figure 2-1
Horizontal Mounting Bracket
Figure 2-2
“S” Type Mounting Bracket
Figure 2-3
“L” Type Mounting Bracket
Figure 2-4
Dovetail Mounting Bracket
