SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual Download Page 136

Page: 136 / 221

14215700-IG, Edition 7.0
January 2018, Original document

136

Wireless Server Information

This page provides information about the firmware version and ARI code of the Spectralink IP-
DECT Server.

1. Click

Status

, and then click

Wireless Server

. The

Wireless Server Status

page appears.

Statistics

On this page you can get an over all overview of how the system is running.

You can get statistics of the following:

Wireless Server

Media Resource

Base Station

Active Calls

Abnormal Releases

Traffic Distribution

Note:

For more in depth information and to gain access to the Spectralink training material, you
must attend training and become Spectralink Certified Specialist.

Please visit

http://partneraccess.spectralink.com/training/classroom-training

for more

information and registration.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual, Page: 136 / 221

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews: