SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual Download Page 131

Page: 131 / 221

14215700-IG, Edition 7.0
January 2018, Original document

131

3. Click

Update

. Selected media resources will be updated.

4. Click

Reboot media resources

if you want to reboot selected media resources.

Note:

Automatic update

is not enabled, Spectralink DECT Media Resources can be

rebooted manually after they have been updated.

To Update Spectralink DECT Handset Firmware Over The Air (SUOTA)

Note:

Only Spectralink DECT Handset 7202/7212, 7522/7532, 7622/7642, 7722/7742 and
Spectralink DECT Handset Butterfly can be updated over the air (SUOTA).

The Spectralink DECT Handsets has a hardware platform that supports dual flash par-
tition to ensure that the new firmware can be CRC16 verified before it takes over from cur-
rent running firmware.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual, Page: 131 / 221

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews: