SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 317

Page: 317 / 456

14215700-IG, Edition 15.0
May 2020, Original document

317

Configuring Handset Login

Enable/Disable Handset Login on Spectralink IP-DECT/Virtual IP-DECT Server

1. Ensure that support of the relevant call handler is enabled (

Configuration

> relevant Call

handler (e.g. Skype for Business)).

2. Click

Configuration

, and then click

Wireless Server

3. On the

Wireless Server Configuration

page, under

Handsets

, enable the handset sharing

features

Handset sharing

and

Handset login

Field

Wireless Server Configuration - DECT

Subscription allowed (Optional)

If enabled, it is possible to subscribe new handsets to
the system.

Note

: Subscription will be disallowed after 120

seconds or when a subscription succeeds. If more
time is needed or more handsets must be subscribed,
it is necessary to disable the parameter

Auto-

matically disable subscription allowed

below.

Automatically disable subscription
allowed (Optional)

If enabled, subscriptions will automatically be dis-
allowed after 120 seconds or when a subscription suc-
ceeds.

If disabled, subscriptions will be allowed until explicitly
disabled.

Default value: Enabled

Note

: This feature is part of DECT Security Step A.

Authenticate calls (Optional)

If enabled, each individual DECT call will be authen-
ticated.

Encrypt voice/data (Optional)

Encryption of voice/data packets transmitted via
DECT.

Possible values:

Disabled

Enabled

Required

Default value: Required

Note

: Repeaters do not support encryption. If set to

Required

, the call is ended when handover is estab-

lished on the repeater.

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands