SpectraLink 8400 Series, Deployment Manual, Page: 44 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide
34
5
Save the XML file to accept your changes.
6
Make a copy of phone[MACADDRESS].cfg for each handset you want
to deploy, replacing ‘[MACADDRESS]’ in the filename with the MAC
address of each handset.
For example:
Creating a Master Configuration File
This section provides instructions on how to modify the master configuration
file.
To modify the master configuration file:
1
Modify the 000000000000.cfg file that is part of the UC Software 4.0.0
software.
If you are using an HTTPS server using Transport Layer Security (TLS), you may
also need to install the appropriate certificates on the handset and select those
certificates in the TLS Profiles where they are selected for provisioning. See TLS
Profiles
in the latest Polycom UC Software Administrator’s Guide available at
http://support.polycom.com/support/spectralink8400 .
For handset MAC address Create configuration file
00907abe80a6 phone00907abe80a6.cfg
00907abe80b3 phone00907abe80b3.cfg
00907abe8222 phone00907abe8222.cfg
Creating a handset-specific configuration file provides a convenient means of
overriding the behavior of one or more handsets without changing the baseline
configuration files for an entire system.