SpectraLink 8400 Series, Deployment Manual, Page: 110 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide
100
For more information, see the wireless.cfg template.
<reg/>
SpectraLink 8400 Series Handsets support six registrations (x= 1 to 6 in the
table shown below).
The relevant configuration parameters are defined as follows:
qbc.encryption.enabled 0 or 1 0 A flag to determine whether or not scanned data
is encrypted.
qbc.inactivity.timeout 30000 to 300000 60000 The barcode scanner disconnect inactivity
timeout period (in milliseconds).
qbc.keepalive.timeout 30000 to 120000 60000 The barcode scanner keep-alive message
timeout period (in milliseconds).
Note: Do not change unless directed by
Polycom Customer Support.
qbc.operating.mode disabled, single,
multi multi The Quick Barcode Connector application
operating mode.
Parameter
(bold = change causes
restart/reboot)
Permitted Values Default Interpretation
Parameter
(bold = change causes
restart/reboot)
Permitted Values Default Interpretation
reg.x.address string in the format
userPart from
userPart@domain Null The user part or the user and the host part of the
phone’s SIP URI.
For example:
reg.x.address=”1002” from 1002@polycom.com
or reg.x.address=”1002@polycom.com”.
x=1 to 6
reg.x.auth.password string Null The password to be used for authentication
challenges for this registration. If non-Null, this
password will override the “Reg Password x”
parameter entered into the Authentication
submenu on the phone's
Settings menu.
reg.x.auth.userId string Null The user ID to be used for authentication
challenges for this registration. If non-Null, this
user ID will override the “Reg User x” parameter
entered into the Settings menu on the phone.
reg.x.displayName UTF-8 encoded string Null The display name used in SIP signaling as the
default caller ID.