Note:
If a key size is undefined, the default key bit length size
used is 2048. A key with a zero length or blank key size field will
not be created.
When you delete a host key and recreate a new one, SSH client sessions will warn you
that the host key has changed for this particular IP address. You must then take one of
the following actions:
1.
Override the warning and accept the new Public Host Key and start a new con-
nection. This is the default. This option allows users to login using either method.
Whichever mode works is allowed for logging in. If the Public Key is not correct or
the Passphrase is not valid the user is then prompted for the login account pass-
word.
2.
Remove the old Host Public Key from their client system and accept the new
Host Public Key. This option simply skips public/private key authentication and
immediately prompts the user for password over a secure encrypted session
avoiding sending passwords in the clear.
3.
Load a public key into VelaSync. This public key must match the private key found
in the users account and be accessible to the SSH, SCP, or SFTP client program.
The user must then enter the Passphrase after authentication of the keys to
provide the second factor for 2-factor authentication.
Please consult your specific SSH client’s software’s documentation.
Public Keys: Viewing, Editing, Loading
The
authorized_keys
file can be viewed and edited, so as to enable adding and deleting
Public Keys. The user may also retrieve the
authorized_keys
file from the .ssh dir-
ectory Using FTP, SCP, or SFTP.
If you want to completely control the public keys used for authentication, a correctly
formatted
authorized_keys
file formatted as indicated in the OpenSSH web site can
be loaded onto VelaSync. You can transfer a new public key file using the Web UI.
To view and edit the
authorized_keys
file:
1.
Navigate to
MANAGEMENT > NETWORK: SSH Setup
. The
SSH Setup
window
will open to the
Host Keys
tab by default.
2.
Select the
Public Key
tab. The
authorized_keys
file appears in the
Public Keys
File
window:
54
CHAPTER
2
•
VelaSync User's Manual Rev. 3
2.9 Configuring Network Settings
Summary of Contents for VelaSync 1225
