Spectracom VelaSync 1225, User Manual

Page: 56 / 272

The Actions panel provides:
General Settings : Allows quick access to the primary network settings
necessary to connect VelaSync to a network. See "General Network Set-
tings" on the facing page .
Web Interface Settings :
Web interface timeout : Determines how long a user can stay logged
on. For more information, see "Web UI Timeout" on page 184 .
Access Control : Allows the configuration of access restrictions from
assigned networks/nodes.
Login Banner : Allows the administrator to configure a custom banner mes-
sage to be displayed on the VelaSync Web UI login page and the CLI (Note:
There is a 2000 character size limit).
SSH : This button takes you to the SSH Setup window. For details on set-
ting up SSH, see "SSH" on page 50 .
IPMI : Enable/Disable IPMI (ADMIN password required).
The Network Services panel is used to enable (ON) and disable (OFF) network
services, as well as the Web UI display mode, details see: "Network Services" on
page 48 .
The Ports panel not only displays STATUS information, but is used also to set up
and manage VelaSync’s network ports via two buttons:
INFO button: Displays the Ethernet port Status window for review pur-
poses.
GEAR button: Displays the Ethernet port settings window for editing pur-
poses.
44
CHAPTER
2
•
VelaSync User's Manual Rev. 3
2.9 Configuring Network Settings