Spectracom VelaSync 1225, User Manual

Page: 44 / 272

Note: For security reasons, please change the default password
immediately; see: "Managing Passwords" on page 180 .
2.
Upon initial login, you will be asked to register your product. Spectracom recom-
mends to register VelaSync, so as to receive software updates and services
notices.
You can also register your product on the Spectracom website
:
register.spectracom.com .
See also "Product Registration" on page 237 .
2.7 Configuring IP Address(es)
VelaSync's ETH0 network interface port is configured with a unique static IP address:
192.168.1.1 . The DHCP is shipped disabled on this port, but can be reinstated below.
The other Ethernet ports default to DHCP; if connected to a DHCP server via ETH1
through ETH5 , VelaSync will accept a dynamic IP address.
Once you are connected to the Web UI, you can manually adjust the IP addresses for
each ethernet port, and enable or disable DHCP.
2.7.1 Changing the IP address using an Ethernet connection
1.
In order to manipulate network configurations, open a web browser, using a PC
that is on the same network as the VelaSync.
2.
Navigate to the IP address connected to VelaSync; either the default static
address (ETH0) or the dynamic address assigned by your DHCP.
3.
Log onto the Web UI as an administrator. If not yet updated, use the default pass-
word:
Note: The default login credentials are:
User name = spadmin
Password = admin123
4. In the Web UI HOME screen, select the MANAGEMENT menu> Network Setup .
5. In the Ports panel on the right, click the GEAR button next to the Ethernet port
to be configured: the Edit Ethernet Port Settings panel will open.
32
CHAPTER
2
•
VelaSync User's Manual Rev. 3
2.7 Configuring IP Address(es)