Spectracom VelaSync 1225, User Manual, Page: 231 / 272

Command Description
ip4set Used to set IPv4 Ethernet port settings information (IP address net mask
and gateway)
ip6add Used to add IPv6 Ethernet port settings information (IP address net mask
and gateway)
ip6del Used to delete IPv6 IP address
ip6get Used to obtain the IPv6 IP address
iptables See for more information.
licenses Displays configured licenses installed (if any)
list Outputs a list of commands
loadconf Restore a saved configuration and reboot
localget Used to obtain the configured local clock
locallist Used to display local clocks
localset Used to configure local clocks
model Displays the Serial Number of the unit
net Displays network status
netnum Displays the number of general-purpose network interfaces
net4 Displays IPv4 network status
net6 Displays IPv6 network status
options Displays configured options installed (if any)
oscget Displays the installed system oscillator
portget Display whether network port is enabled (for example, "portget ETH2")
portset Enable or disable a network port:
"portset x on" where "x" is the port number (for example, "ETH2")
"portset X off"
[NOTE: Available since Web UI Revision no. 5.1.2]
portstate Display the current state for a network port
ppsctrl Enable/disable individual 1PPS output signals
priorset Sets the priority of an entry in the reference priority table
radius setretry <value> Sets how many radius login retries will be attempted
radius getretry <value> Gets the number of radius login retry attempts
VelaSync User's Manual 219
APPENDIX