Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 239 / 378

requesting service.
Returned format
<Integer> = the sum (between 0 and 255) of all bits that are true.
Status byte Register (1 = true)
Bit Weight Name Condition
7 128 OPR Enabled operation status has occurred.
6 64 MSS Reason for requesting service.
5 32 ESB Enabled status event condition has occurred
4 16 MAV An output message is ready
3 8 QUE The quality of the output signal is questionable
2 4 EAV Error available
1 2 Not used
0 1 Not used
6.3.1.11 *TST?
Self Test
The self-test query causes an internal self-test and generates a response indicating whether or
not the device completed the self-test without any detected errors.
Returned format
<Integer>
Where:
0
= No error
1
= Error in reference clock
6.3.1.12 *WAI
Wait-to-continue
The Wait-to-Continue command prevents the device from executing any further commands or
queries until execution of all previous commands or queries have been completed. It differs
from the *OPC? command in that it blocks within the GSG. It also resumes operation and
allows synchronous execution of a command sequence within the GSG 10Hz epoch.
6.3 Command Reference
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
223