Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 237 / 378

preferred, particularly if several consecutive commands are used as a means to count elapsed
epochs.
For example, checking that the ECEF position command is applied on the next 10 Hz (100 ms)
epoch:
sour:scen:ecefposition IMMEDIATE,1000.00,2000.00,3000.00
*OPC?
sour:scen:ecefposition?
Returned format
1
6.3.1.7 *RST
Reset
Resets the device. Any ongoing activity is stopped and the device is prepared to start new oper
ations.
Example
*RST
6.3.1.8 *SRE
Service Request Enable
Sets the service request enable register bits. This enable register contains a mask value for the
bits to be enabled in the status byte register. A bit that is set true in the enable register enables
the corresponding bit in the status byte register to generate a Service Request.
Command Syntax
*SRE <Decimal data>
Parameters
<dec.data> = the sum (between 0 and 255) of all bits that are true.
Service Request Enable Register (1 = enable)
Bit Weight Enables
7 128 OPR, Operation Status
6.3 Command Reference
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
221