Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 163 / 378

4.9.13.1 Defining Events in StudioView
To make a simulation more realistic, you can introduce events that can change power levels of
certain signals, add or modify multipath signals, change the propagation environment, and
modify navigation messages.
In order to describe an event, you need to specify the event time in seconds counted from the
beginning of scenario, and set the event parameters .
Several events can occur in the same epoch. Note that PRN/channel events overrule scenario
events.
Note: One GSG epoch equals a 100 ms block of time.
Using the Events Editor
To open StudioView's Events Editor, navigate to Tools > Events editor , or click .
Events are listed in the table on the left and stored in a text file that is linked to the scenario. To
show/hide the event file text on the right side of your screen, click :
Adding an Event
To add a new event, click :
4.9 Studioview Tasks
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
147