Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 144 / 378

Table 4-2:
Speed conversion table (Note: mph and knots are rounded down.)
Note: When changing speed settings, the time values in the Waypoints table will
be updated automatically.
Note: As noted before, changes to speed, altitude and heading should be
gradual and realistic for the type of vehicle simulated.
SHIFT-right click or CTRL-right click any group of waypoints to
batch-edit
their settings by click
ing .
Add or delete waypoints by clicking the + icon, or the x icon, respectively. By default, Stu
dioView will insert the waypoint at the end of list. However, you may manually set a Point # ,
which will add the waypoint to that place in the trajectory.
Select a waypoint in the Waypoints table, and then drag its Google Maps pin to relocate it.
Add a brief stop (e.g., to simulate a red stop light) by highlighting any waypoint and clicking
the STOP button. Enter the stop duration, and the speed at which to continue after the stop.
Saving the Trajectory
To save the trajectory, click , or select
File > Save
. The default file format is
.nmea
.
128
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.9 Studioview Tasks