Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 113 / 378

Figure 3-39:
System information – Options
For more information on GSG Options, see "GSG Series Model Variants and Options" on
page 194.
3.6.6 Restore Factory Defaults
This option restores the GSG unit to its factory default configuration.
To access this view, navigate to Options > Reset to factory defaults :
Figure 3-40:
Restore factory defaults
Clean&Restore will restore the original pre-defined scen
ario/trajectory/event/navigation data files , and delete all user created/uploaded files
and execution log . Please wait for this operation to complete. When prompted that the
operation is complete, press “OK”. Wait until this operation is complete before power
cycling the GSG unit.
Restore
will only restore
data files
to their defaults – all user data on the unit will remain
stored (unless they have same file names as the factory data, which is not recom
mended).
Cancel will do nothing, and return to the Options menu.
3.6.7 Calibration
Note:
This chapter describes the Calibration menu items. Calibration itself should
only be attempted by qualified technicians. Alternatively, you can send your GSG
unit to Spectracom to be calibrated.
Via the Calibration view, you can:
calibrate the unit’s maximum output power, and OXCO frequency
view the results of a previous user calibration.
To access the Calibration view, navigate to Options > Calibration :
3.6 "Options" Menu
CHAPTER
3
•
User Manual GSG-5/6 Series Rev. 26
97